- Competitive shipping rates
- Fast and reliable delivery
- Premium quality
International
Nederland
België
Deutschland
Fiberlogy FIBERFLEX 30D Pink 0.5kg
€ 29,95
Fiberlogy FIBERFLEX 30D Pink 0.5kg
Fiberlogy FIBERFLEX 30D Pink is a highly flexible filament with a Shore hardness of D30.
Fiberlogy FIBERFLEX 30D Beige
Fiberlogy FIBERFLEX 30D Black
Fiberlogy FIBERFLEX 30D Blue
Fiberlogy FIBERFLEX 30D Graphite
Fiberlogy FIBERFLEX 30D Gray
Fiberlogy FIBERFLEX 30D Light Green
Fiberlogy FIBERFLEX 30D Orange
Fiberlogy FIBERFLEX 30D Red
Fiberlogy FIBERFLEX 30D White
Fiberlogy FIBERFLEX 30D Yellow
- Excellent references
- Fast and reliable delivery
- Free shipping from € 0,-
- Product Description
- All Features
- Data Sheets
- Ask a Question
Fiberlogy FIBERFLEX 30D Pink is flexible filament that is softer compared to the Fiberflex 40D. With a hardness of 30D on the Shore scale (similar to, for example, a shoe sole), you can print very elastically. Printing with a direct drive extruder and at low speed is highly recommended. Very suitable for prints that need to be able to bend and can be used for both amateur and professional applications. FIBERFLEX 30D filament can withstand lower temperatures well, is wear-resistant, and has high impact resistance.
Fiberlogy is known for its premium quality filament that meets the highest quality standards and goes beyond other manufacturers. By maintaining a diameter tolerance of 0.05 mm and a roundness tolerance of 0.03 mm for flexible filament, FIBERFLEX 30D distinguishes itself from the rest and brings out the best in your 3D printer.
Applications
- Mechanics: gaskets, conveyor belts, hinge seals, casings, impact protection
- Gadgets: phone cases, pedometer or watch straps, VR glasses
- Household: bumpers, face masks, door stoppers, coasters, non-slip caps
- Toys: rubber figures, car tires, games, bumpers, airplanes
- Jewelry: bracelets, necklaces, rings, earrings
Tip: To facilitate easy removal of the print, it is advisable to heat the bed up to 110°C
Shore hardness
See the table below to compare the hardness of 30D. Also useful for comparing with other TPU filaments that work with Shore A.
- Material
- Flexible
- Hardness
- D30
- Color
- Pink
- Weight
- 0.5 kg
- Diameter
- 1.75 mm
- Diameter Tolerance
- +/- 0.05 mm
- Roundness Tolerance
- + 0.03 mm
- Print Temperature
- 200-220°C
- Bed Temperature
- 50-70°C
- Coil Outer Diameter
- 200 mm
- Coil Inner Diameter
- 50 mm
- Coil Width
- 88 mm
- EAN Code
- 5902560991055
