- Competitive shipping rates
- Fast and reliable delivery
- Premium quality
International
Nederland
België
Deutschland
Fiberlogy MattFlex 40D Graphite
€ 52,95
Fiberlogy MattFlex 40D Graphite
Fiberlogy MATTFLEX 40D Graphite is a print-friendly flexible filament with a Shore hardness of D40. The matte finish provides a clean finish where layers are almost invisible.
Features
- Material
- Flexible
- Hardness
- D40
- Color
- Graphite Gray
- Weight
- 0.85 kg
- Diameter
- 1.75 mm
- Excellent references
- Fast and reliable delivery
- Free shipping from € 0,-
- Product Description
- All Features
- Data Sheets
- Ask a Question
Fiberlogy MattFlex 40D Graphite is a flexible filament that allows you to easily create rubber-like prints. With a hardness of D40 on the Shore scale (comparable to, for example, skateboard wheels), you can print at speeds up to 45mm/s with a direct drive extruder (for a bowden setup, 15-30 mm/s). The feeding is simple and the layers adhere extremely well.
This filament distinguishes itself from FiberFlex 40D with its matte finish. As a result, the individual layers are barely visible and it has a very neat matte finish. The result is truly stunning. Due to its user-friendliness, Fiberlogy MattFlex 40D can be used for both amateur and professional applications. Fiberlogy MattFlex 40D filament can withstand lower temperatures, is wear-resistant, and has high impact resistance. You will discover that printing with flexible filament doesn't have to be difficult at all.
Fiberlogy is known for its premium quality filament that meets the highest quality standards and goes beyond other manufacturers. By maintaining a diameter tolerance for flexible filament of 0.05 mm and a roundness tolerance of 0.02 mm, MattFlex 40D distinguishes itself from the rest of Fiberlogy's range, allowing you to get the best out of your 3D printer.
Applications
- Mechanics: gaskets, conveyor belts, hinge seals, housings, fall protection
- Gadgets: phone covers, pedometer or watch straps, VR glasses
- Household: bumper edges, door stoppers, face masks, coasters, anti-slip caps
- Toys: rubber figures, car tires, games, bumpers, airplanes
- Jewelry: bracelets, necklaces, rings, earrings
Tip: To make it easier to remove the print, it is recommended to heat the bed to 110°C.
Shore hardness
Refer to the table below to compare the hardness of 40D. Also useful for comparing with other TPU filaments that work with Shore A.
- Material
- Flexible
- Hardness
- D40
- Color
- Graphite Gray
- Weight
- 0.85 kg
- Diameter
- 1.75 mm
- Diameter Tolerance
- +/- 0.05 mm
- Roundness Tolerance
- + 0.03 mm
- Print Temperature
- 200-220°C
- Bed Temperature
- 50-70°C
- Coil Outer Diameter
- 200 mm
- Coil Inner Diameter
- 50 mm
- Coil Width
- 88 mm
- EAN Code
- 5902560991147
