Maintenance Set

With the Maintenance Set, you have the essential tools for everyday FDM 3D printer care close at hand. Clear a blocked nozzle, cut filament cleanly, remove residue and degrease your print bed for improved adhesion.

Why this set is useful

• Ideal for beginners who have just started using a 3D printer.
• Helps you keep your printer in excellent working condition.
• All four components are selected for practical day-to-day maintenance.
• A useful gift idea for anyone who enjoys 3D printing.
• The components cost €28.10 separately. In this set, you pay €24.95 and save €3.15.

What’s included

• 5× 0.3 mm stainless steel nozzle needle (in a sealed tube): For carefully clearing a blocked nozzle.
• 1× copper nozzle brush: For brushing baked-on filament from the hot nozzle and hotend. Copper will not damage a brass nozzle.
• 1× side cutter, Model 170: For cutting filament at an angle when loading it, and for removing supports and small edges from prints.
• 1× Höfer Chemie isopropanol, 1 litre, over 99% pure: For degreasing the print bed to improve adhesion and for cleaning parts.

Quick maintenance advice

Only push the needle through the nozzle or brush it when the nozzle is at operating temperature. Degrease the print bed with isopropanol on a lint-free cloth, never on a hot plate. Isopropanol is highly flammable, so make sure the area is well ventilated.