Magigoo Pro PP

Magigoo Pro PP is designed for professional use, specifically for working with polypropylene filaments (PP filament). The part is relatively easy to remove once cooled, and the adhesive residues can also be easily removed by following the provided procedure.

Polypropylene (PP) is a thermoplastic semi-crystalline polymer with properties of good impact resistance and ductility. It also has a relatively non-polar molecular structure, making it resistant to chemicals and therefore ideal for use in food packaging and medical equipment. In the adhesive industry, it is widely known that it is difficult to bond polyolefin materials to other types of materials. This, combined with partial crystallinity, makes it a challenging material to print with. Magigoo PP solves this problem and provides added convenience for FDM 3D printing.

Magigoo Pro PP is designed and tested to work with various brands of PP filament.

User instruction

• Shake the bottle vigorously.
• Apply to the desired area by pressing on the tip on the bed (activating the inner valve) and spread if necessary.
• Print according to the recommendations of the filament/printer manufacturer.
• Cool down and remove - The part should be easier to remove after sufficient cooling. If the part is difficult to remove, a scraper should be used to facilitate the removal of the printed object.
• Cleaning - Use a wet, hard sponge to remove all adhesive residues. If the adhesive layer is wet, it forms a white layer that can be easily removed with a scouring pad. If the layer is completely loose from the print surface, it can be wiped with a wet cloth and finally cleaned with a dry paper towel.

Safety

This adhesive is for professional use. Contact with eyes causes serious eye damage. Hands and exposed skin should be thoroughly washed after use.

Tips for using Magigoo Pro PP

For larger prints, a 20 mm border with multiple layers is recommended.

In case of excessive adhesion, it is recommended to moisten the print bed with a small amount of water and work slowly underneath the printed object, which should make removing the part easier.

Important note: The applicator has an active spring valve, which is activated when the applicator is pressed against the heated bed. Do not squeeze the bottle like a "ketchup bottle", as it may cause the applicator to detach. The bottle should only be lightly squeezed when the tip is pressed against the bed.

Instruction video