Fiberlogy Easy PLA Starter Pack (3 Rolls)

With the Fiberlogy Easy PLA Starter Pack, you can build a versatile colour base for your 3D printing projects in one go. You receive three 0.85 kg rolls of 1.75 mm filament: black and white are always included, while you choose the third roll in red, yellow, green or blue. That gives you 2.55 kg of Easy PLA in total.

Why this pack is useful

• Easy PLA is straightforward to print, making it suitable whether you are just starting out or already have plenty of experience.
• A diameter tolerance of ±0.02 mm and a roundness tolerance of 0.01 mm support consistent material flow and accurate prints.
• Black, white and your chosen colour give you a practical base for prototypes, toys, gadgets, decorations and functional parts.
• You save 5% compared with buying the three rolls separately.

What is included

• 1 × Fiberlogy Easy PLA Black, 0.85 kg, 1.75 mm
• 1 × Fiberlogy Easy PLA White, 0.85 kg, 1.75 mm
• 1 × Fiberlogy Easy PLA in red, yellow, green or blue, 0.85 kg, 1.75 mm

Printing recommendations

Use a nozzle temperature of 200–230°C and a heated-bed temperature of 50–70°C as your starting point. For Easy PLA White, Fiberlogy recommends approximately 230°C because of the colourant. You can then fine-tune the settings for your printer, speed and model.